9 Tips to Get Your Pool Ready

As summer approaches, it might be exhilarating to realize that it will soon be time to get back to the pool. However, before you plunge into the pool, there are several precautions you should take. One of the most crucial duties is getting the pool ready for summer, but how exactly do you accomplish that?

Pool owners must plan ahead of time for pool openings so that their family and friends may keep enjoying the advantages of owning a pool. Preparing your pool for the summer requires planning, resources, and a sequence of tasks. You may also hire services like Wood Glass Group to handle pool upgrades so that you can concentrate on relaxation and swimming.

Furthermore, preparing your pool may seem challenging, but with adequate labor and following a few simple procedures, the process can be finished quickly and easily. Here are some actions to guarantee your pool is fully equipped for swimming.

1.  Take Off the Pool Cover.

The first step should be to clean off your pool cover. Wipe any dirt or water that has accumulated on the cover’s surface. Also, spread out the cover and spray it with the maximum pressure your hose permits if you have the room. Then, before folding and storing it, sprinkle it with talcum powder to avoid binding or adhering while it’s stored, and make sure it is dry—the more chilled the storage, the better. After cleaning, preserve it for the next season.

2.  Clean Up the Leaves and Garbage.

You may discover lingering leaves, dirt, and usual weather accumulation on and around the pool throughout the autumn and winter seasons. Sweep any leaves or garbage off the pool cover and the surroundings before detaching the cover. If you observe stagnant water on the surface, utilize a pump to drain it and keep it from entering the pool.

3.  Inspect The Pumps and Filtrations.

Ensure that all of the equipment is in operating status. Inspect pumps, hoses, and filtrations following the manufacturer’s instructions. Also, enable the circulation system to operate for 8 to 12 hours. Next, have your pool contractor examine and clean the pump and filter. Before running the pump for the first time, all antifreeze products must be eliminated. Your pool contractor will look for leaks and other problems when operating the pump.

4.  Examine The pH Levels.

You may use a water testing kit to monitor the water yourself, or you can take samples of your pool water to a pool shop, which will typically test it for free. This is advised since specialists can thoroughly test the water and ensure that all mineral levels and pH levels are safe and proper.

Evaluate the pH level, acidity, calcium hardness, and so on after the 8 to 12-hour run period. Put the pH kit’s test tube with water from at least 18 inches underneath the surface. Remove your specimen from the inlet of the pump. Then, shake the tube after adding the test-specific quantity of the agent. Do not use your finger to cover the tube since oils added by your palm might taint the findings. Then, to equalize the water, add chemicals in the correct sequence.

5.  Repair The Pool.

The swimming pool may have wreckage and is covered with dust inside, so it should be thoroughly cleaned before opening. Have your pool operator thoroughly check and repair the area around the pool. Moreover, Inspect for tears in the pool lining, cracks in the trampoline, and damage to the cement around the pool.

6.  List Your Supplies and Safety Precautions.

Examine all pool-related support and safety equipment. Do you have a filled first aid kit that is easily accessible? Is your cleaning equipment in good condition? Are the gates and locks securing enough to prevent unauthorized entry or keep the pool safe while you’re away for the weekend or business?

7.  Add More Water and Chemicals.

Once the pool has been cleaned, rehabilitated, and is ready to use, you can add more water and chemicals to occupy it completely. Consult your pool operator for chlorine and other chemical suggestions to tidy your pool water.

Switching from a traditional chlorine system to a standard salt generator is the most dependable solution for many pool owners. Unlike chlorine, salt doesn’t evaporate even at high temperatures. However, it is only required to add it when water is lost due to rain or splattering. The significant benefit of salt pools is that they have a more consistent pH, requiring fewer chemical compounds and less management. The cost of converting from chlorine to salt varies depending on the size of your swimming pool and the estimated cost of the salt.

8.  Analyze The Water Level.

Examine the skimmer’s water level. The water must be in the midst of the skimmer opening for appropriate circulation for the pump to perform effectively. Add water as needed. At the same time, while you’re waiting for the pool to fill, inspect and test all guardrails, ladders, slides, and diving boards for loose bolts or other possibly dangerous conditions.

The water in your swimming pool will appear cloudy now you’ve chemically sanitized it. It is critical to wait for the water to clear before jumping in and enjoying it. This time allows the chemicals to do their job of managing and disinfecting the pool, making it safe for swimmers.

9.  Clean Your Pool on A Weekly or Monthly Basis.

Now that your pool is ready for use, it is essential to maintain it properly throughout the summer season. Vacuum clean the swimming pool on a weekly or monthly basis. Once a month, perform a chemical adjustment check. Maintaining good routine maintenance for your swimming pool will ensure that it lasts longer and performs optimally.


Finally, you now understand how to prepare the pool for the summer. You can easily accomplish this by following the guidelines mentioned above. Regularly check your pool’s chemicals and, if necessary, clean it. Also, keep in mind to review your pool’s equipment. Furthermore, it can be made easier every year if you hire a competent pool contractor to assist you in getting your pool fully prepared for the swimming season.

Leave a Comment